Drivetrain Components

- BCD: 110 - Chainring Bolts: 5 - Chainring Comp: Double - Teeth: 50 - Primary Color: Black - Material: Aluminum - Position: Outer - Speed: 11

SRAM 94 BCD narrow-wide chainrings for X01 and X1 cranks. Our NSB narrow-wide rings are CNC machined in Canada and feature a durable tooth profile that virtually eliminates chain drop. Note: The 28T – 94 BCD ring does not use the OE screws. The NSB 28T ring requires 4x M8 x 0.75 x 10mm long bolts. These are commonly available at your LBS and are the most commonly used bolt and nut combination to mount chainrings to cranks. All other sizes, 30T–36T, use the OE screws. Specifications: - 94mm Bolt Diameter Circle (4-bolt 94 BCD) - Bottom Bracket Types: BB30 & GXP - Chainline: 28T is 48mm / 30T–36T are 49.5mm - Machined from solid 7075 T6 Aluminum - Anodized Black with Laser Etched Graphics - Compatible with all 9, 10, 11, & 12-speed SRAM drivetrains - Compatible with all 9, 10, & 11-speed Shimano drivetrains Precision CNC Machined in Whistler, BC Weight: 28T – 40g 30T – 37g 32T – 42g 34T – 55g 36T – 65g

- Lightweight Design - Steel rings with engineering polymer spacers - Nickel finish - 8 Speed compatible - Weight—346g

- 8 speed wide range - 11-40t - Steel spider

- 9 speed wide range - 11-40t - Steel spider

- 10 Speed wide ratio cassette - Alloy spiders - Steel lockring - Fits Shimano/SRAM freehub - 448g (11-42); 414g (11-40)

- 11 speed wide range cassette - 7075 Aluminum largest sprocket - Alloy spiders, spacers and lockring - Fits Shimano/SRAM freehub - 465g (11-46); 401g (11-42); 389g (11-40)

- 11 speed wide range cassette - 7075 Aluminum largest two sprockets - Alloy spiders, spacers and lockring - Fits Shimano/SRAM freehub - 563g (11-50t)

Sun Race, FCM300, Crankset, 48/38/28T, 170mm

- Black polymer spacers - Multiple speed options available

- Steel cogs - Composite spacers

RaceFace Crank Arm Fixing Bolts - M15

RaceFace CINCH Bottom Bracket Spacers - For use with 30mm CINCH spindle systems

- Crank dust cap - Works with most three-piece crank models

- Sunlite Cottered Pins

- Sunlite Cottered Pins

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.

Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

Shimano Dura-Ace R9100 Cassette Spacers

- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability

Calibur V2 Spindle replacement parts

Bolts for attaching sprocket to the crank arm.

Spacers to insure proper chainline and chainring spacing on your bike. - 3.5mm thick - Material: alloy

Race Face Crank Arm Fixing Bolts - For EXI Cranks - M15